ZIBOO
ZIBOO TP82-L Insulation Piercing Clip Set 2 mm Probes Connections,Wire Piercing Use for Fluke TL71 TL75 TL175
Regular price
$13.50 USD
Expanded and Lengthening on the Original Basis, Extend The Probe To a Length Of 19cm (7.48″)For Easier Operation and Deeper Measurement
Materials
Piercing Tip: Hardened Stainless Steel
✅Expanded and Lengthening on the Original Basis, Extend The Probe To a Length Of 19cm (7.48″)For Easier Operation and
✅Make contact with insulated wires without cutting or stripping insulation
✅Spring loaded double “V” clamp holds wire centered for piercing needle
✅Pierces insulation on wires from 22 to 14 AWG (0.030” through 0.180” diameter)
✅Tiny hole left in insulation can easily be sealed
✅Rotating banana jack will not twist test lead while the needle is screwed into wire
Spring: Steel
Jack: Brass
Insulation (Jack, Body, Tip): Nylon Red Or Black Caps With High Visibility Yellow Nylon
Ratings
Operating Voltage: 30V AC Or 60 VDC Max.
Current: 5 Amperes Max.
Set Includes : Two Clips, One Red And One Black
Stainless Steel Probe Pierces Insulation On 14, 16 And 18 Gauge Wire.
You Control Needle Depth To Minimize Insulation Damage. Essential For Use Under Hood Or Under Dash. Use It On Fuel Injectors Or Sensors While Providing Complete Insulation To Grounding Due To Design.
Features:
Make contact with insulated wires without cutting or stripping insulation.
pring loaded double “V” clamp holds wire centered for piercing needle.
Pierces insulation on wires from 22 to 14 AWG (0.030” through 0.180” diameter).
Tiny hole left in insulation can easily be sealed.
Red or black color-coded cap for easy identification.
Rotating banana jack will not twist test lead while the needle is screwed into wire.
ZIBOO TP82-L Lengthening Type 7.48″ Insulation Piercing Clip Set, 2 mm Probes Connections,Wire Piercing, Multimeter Voltmeter Testing,Car Wire Tester, Multimeter Test Leads, Pierce, Probes for Probe Tips
Features
Expanded and Lengthening on the Original Basis,
Extend The Probe To a Length Of 19cm (7.48″)For Easier Operation and Deeper Measurement
• Make contact with insulated wires without cutting or stripping insulation.
• Spring loaded double “V” clamp holds wire centered for piercing needle.
• Pierces insulation on wires from 22 to 14 AWG (0.030” through 0.180” diameter).
• Tiny hole left in insulation can easily be sealed.
• Red or black color-coded cap for easy identification.
• Rotating banana jack will not twist test lead while the needle is screwed into wire.
For Use with Test Leads with 2 mm Probes, Allowing You To Tighten/Loosen Clamp While Still Connected To The Test Lead For Use With Test Leads With 2mm,Tested To 60 V Dc Stainless Steel Probe Pierces Insulation On 14, 16 And 18 Gauge Wire. You Control Needle Depth To Minimize Insulation Damage. Essential For Use Under Hood Or Under Dash. Use It On Fuel Injectors Or Sensors While Providing Complete Insulation To Grounding Due To Design. The ZIBOO TP81 Connects To Test Leads with 2mm Probes (Such As TL71,TL75,TL175, 69410,etc ).
Stainless Steel Probe Pierces Insulation On 14, 16 And 18 Gauge Wire. You Control Needle Depth To Minimize Insulation Damage. Essential For Use Under Hood Or Under Dash. Use It On Fuel Injectors Or Sensors While Providing Complete Insulation To Grounding Due To Design. The TP82 Connects To Test Leads with 2 mm Probes. Non-Rotating Banana Jack Prevents Leads From Tangling, Allowing You To Tighten/Loosen Clamp While Still Connected To The Test Lead. For Use With Test Leads With 2mm. Tested To 60V DC.Car Wire Tester, Voltage Tester, Wire Clip Voltage Test Tool
Materials
Piercing Tip: Hardened Stainless Steel
Spring: Steel
Jack: Brass
Insulation (Jack, Body, Tip): Nylon Red Or Black Caps With High Visibility Yellow Nylon
Ratings
Operating Voltage: 30V AC Or 60 VDC Max.
Current: 5 Amperes Max.
Set Includes : Two Clips, One Red And One Black
